Generic Data Logging Guide with EK1 Lite

This guide provides step-by-step instructions on the data logging process using the EK1 Lite device. For a visual demonstration, you can watch our detailed tutorial here.

1. Preparing Your EK1 Lite Device:
   • Insert your micro-SD card into the EK1 Lite.
   • Install the EK1 Lite into your vehicle.
2. Setting Up the Device:
   • Access 'Settings' on your EK1 Lite and select your vehicle type.
   • Proceed to 'Logging View' to customize your logging dashboard.
3. Customizing Your Data Logging:
   • Add essential parameters to your custom view, such as Engine RPM, Boost Pressure, Wastegate Valve Position, Throttle Position, Ignition Timing, and others.
4. Conducting the Test Drive:
   • Begin the data recording, then carry out a test drive that includes a variety of driving conditions.
5. Saving the Data:
   • Exit 'Logging View' after your test drive to save the data log on your micro-SD card.
6. Uploading Your Data:
   • Transfer the micro-SD card to a PC, log into your SXTHNK account, and upload the data for review.
7. Receiving Your Custom Tune:
   • After the review, you'll receive a customized tune file based on your data log.