Loading a Tune onto Your Car with SXTHNK's System

Follow these straightforward steps to ensure a safe and successful tune load:

1. 💾 Download the Tune File:
   • Access the 'My Files' area on the SXTHNK platform.
   • Locate and download the desired .EKP tune file.
2. 📦 Transfer the File to the SD Card:
   • Insert the SD card from your SXTHNK device into your computer.
   • Copy the downloaded .EKP file onto the Maps folder of the SD card.
   • Safely eject the SD card and reinsert it into your SXTHNK device.
3. 🚗 Prepare Your Vehicle:
   • Park your vehicle in a secure and safe area.
   • If necessary, connect a battery charger to maintain power during tuning.
   • Turn your vehicle to 'On' mode without starting the engine (two ignition taps).
4. ⚠ Check for Necessary Patches:
   • Some vehicles require a specific patch before flashing a tune.
   • Check the patching guide Patching Guide
5. 🔥 Select and Flash the Tune:
   • On your EK1 device, go to Power Mode and select Writing.
   • Choose the desired tune for your vehicle.
   • Start the flashing process and wait for completion without interruption.

Important Safety Notes:

• Always tune in a safe area, away from traffic or hazards.
• Ensure your vehicle is stationary with the engine off during tuning.
• Monitor the battery level and use a charger if necessary.
• Adhere to vehicle-specific instructions, especially for patches.

Adhering to these steps will guarantee a smooth and secure tuning process for your vehicle.